TECHNICAL MANUAL
following data is not underlined, and the underline thickness set before
the mode is turned off does not change.
The default value thickness is 1 dot. Changing the character size does not
affect the current underline thickness.
Underline mode can also be turned on or off by using
“
ESC !
”
.
Note, however, that the last received is effective.
This command is not effective on Kanji characters.
[Default]
n = 0
[Reference]
ESC !
ESC 2
[Name]
Select 1/6-inch line spacing
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal 27
50
[Description]
ESC 2 sets the line spacing to 1/6 of an inch.
[Notes]
The line spacing can be set independently in standard mode and in page
mode.
[Reference]
ESC 3
ESC 3
n
[Name]
Set line spacing
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal 27
51
n
[Range]
0≤
n ≤ 255
[Description]
ESC 3
n sets the line spacing to [n x (vertical or horizontal motion unit)]
inches.
The default setting of the paper feed amount is 1/6 inch.
The default value in the vertical direction is 1/144 inch.
[Notes]
The line spacing can be set independently in standard mode and in page
mode.
TITLE : WTP-100
Page33
