22
Operating Instructions – MOVITRAC® LTE-B
4
Electrical installation
Installation
• Make sure that shieldings and sheaths of power cables are designed according to
the wiring diagram in section "Connecting inverter and motor" (page 25).
• Make sure that all terminals have been tightened with the proper tightening torques.
• Control terminals: 0.5 Nm
• Power terminals: 1 Nm
Opening the front cover
IP55 sizes 1 and 2
To loosen the front cover, position the screwdriver in the opening as shown in the fol-
lowing figure.
IP55 size 3, and IP66 all sizes
Remove the two screws on the inverter's front to open the front cover.
Quick reference
guide
A quick reference guide is available in the IP20 housing in a separate tray above the dis-
play. In IP55/IP66 housings, the quick reference guide is attached inside the front cover.
2933381515
2933384203
[1]
Screws of the front cover
[1]
[1]
Summary of Contents for MOVITRAC LTE-B series
