SEW MOVITRAC LTE-B series, Operating Instructions Manual

Page: 49 / 80

Operating Instructions – MOVITRAC® LTE-B
49
8
P-15 Binary input function selection
Parameters
8.3.2 Keypad mode
When P-12 = 1 or 2 (keypad mode), the following table applies.
8.3.3 SBus control mode
When P-12 = 3 or 4 (SBus control mode), the following table applies.
11 N.O. contact
Briefly closed for for-
ward movement N.C. contact
Briefly opened for st
op
N.O. contact
Briefly closed for back-
ward movement Speed reference Close binary inputs 1
and 3 at the same
time to stop the motor
with deceleration
ramp 2 (
P-24 ).
12 Open: Stop/
Controller inhibit
Closed: Enable/Start Closed for start
Closed for activation and
deceleration ramp 2 Open: Analog speed
value reference
Closed: Preset speed 1 Speed reference –
P-15 Binary input 1 Binary input 2 Binary input 3 Analog input Comments
P-15 Binary input 1 Binary input 2 Binary input 3 Analog input Comments Key 5 Key 6
0, 1,
5,
8-12 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: No function
Closed: Speed up Open: No function
Closed: Speed
down Open (0 V):
Clockwise rota-
tion
Closed:
(10-24 V): Coun-
terclockwise rota-
tion – Increase
speed Reduce
speed
2 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: No function
Closed: Speed up Open: No function
Closed: Speed
down Open (0 V):
Speed reference
keypad
Closed:
(10-24 V): Fixed
setpoint speed 1 – Increase
speed Reduce
speed
3 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: No function
Closed: Speed up Ext. error input:
Open: Controller
inhibit
Closed: Enable Open (0 V):
Speed reference
keypad
Closed:
(10-24 V): Motor
stops Connect exter-
nal PTC tem-
perature
sensor or simi-
lar to binary
input 3. Increase
speed Reduce
speed
4 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: No function
Closed: Speed up Open: Speed ref-
erence keypad
Closed: Speed ref-
erence analog
input Speed reference – Increase
speed Reduce
speed
6 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: Clockwise
rotation
Closed: Counter-
clockwise rotation External error
input:
Open: Controller
inhibit
Closed: Enable Open (0 V):
Speed reference
keypad
Closed:
(10-24 V): Fixed
setpoint speed 1 Connect exter-
nal PTC tem-
perature
sensor or simi-
lar to binary
input 3. Increase
speed Reduce
speed
7 Open: Stop/Con-
troller inhibit
Closed:
Enable/Start Open: Stop
Closed: Clock-
wise rotation DI3: External error
input:
Open: Controller
inhibit
Closed: Enable Open (0 V):
Speed reference
keypad
Closed:
(10-24 V): Fixed
setpoint speed 1 DI1 and DI2
closed: Motor
stops with
rapid stop
ramp
P-24 .
Increase
speed Reduce
speed
P-15 Binary input 1 Binary input 2 Binary input 3 Analog input Comments
0, 1, 2,
4, 5, 8
– 12 Open: Controller
inhibit
Closed: Enable No effect No effect No effect Binary input 1 must be
closed in order to have the
motor running. Start and
stop command are issued
via the gateway.
P
i
f
kVA
Hz
n