SEW-Eurodrive MOVIPRO PHC2 Series, Operating Instructions Manual, Page: 52 / 188

5
Mechanical installation
Assembly
Operating Instructions – MOVIPRO
®
PHC2.A-A..M1-E45C-C5
52
Mounting the device
The following figure provides an overview on the mounting of the device:
[1] [2]
[4]
[3]
9007209052494859
[1] Holding fixture, e.g. square pipe with an edge length ≤ 32 mm
[2] Bore for M6 screw
[3] M6 screw of an appropriate length with washer
[4] M6 screw of an appropriate length with washer
Procedure
1. Use the mounting brackets to hang the device on the holding fixture [1].
2. Attach the mounting brackets to the holding fixture [1] with M6 screws [3] in appro-
priate length.
3. As an alternative you can attach the mounting brackets from above using M6
screws [4].
26596598/EN – 10/2020