manualshive.com logo in svg

SEW-Eurodrive MOVIPRO PHC2 Series, Operating Instructions Manual, Page: 154 / 188

Share
Download
SEW-Eurodrive MOVIPRO PHC2 Series Operating Instructions Manual Download Page 154

8

Operation

Status LEDs

Operating Instructions – MOVIPRO

®

 PHC2.A-A..M1-E45C-C5

154

8.6

Status LEDs

The  status  LEDs  display  the  current  operating  state  of  the  operating  system,  the
SEWOS loader, the application software and the CAN system bus.

[1]

33076128011

[1]

Status LEDs L1, L2, L3, L4

8.6.1

Status LED L1 system

State LED

Meaning

Measure

Off

The MNC45A controller is not
supplied with voltage.

•

Check the backup voltage at
the signal feed connector
X121..

•

Contact SEW‑EURODRIVE
Service if the backup voltage
is present.

Red

The firmware fails to boot.

Contact SEW‑EURODRIVE ser-
vice.

Flashes red

The firmware is faulty.

Contact SEW‑EURODRIVE ser-
vice.

Orange

•

The product cannot find a
valid system image.

•

The internal memory of the
communication and control
unit is faulty.

Contact SEW‑EURODRIVE ser-
vice.

Green

The firmware has booted. The
product is ready for operation.

26596598/EN – 10/2020

Summary of Contents for MOVIPRO PHC2 Series





























































































































































































Reviews:

No comments