Please refer to the document
Eii External Integration Interface
for detailed information about XML
import and export.
Note that the Ethernet setup parameters (IP address, netmask and gateway) and probe name and
location are not part of the XML document. Hence exporting the full configuration of one 10G Probe and
restoring it on another will make the two 10G Probes identical except for the network settings.
Clicking the Debug data export option will generate a document containing debug information that may
be useful if 10G Probe misbehavior is reported. This file should be sent along with a description of the
misbehavior.
6.11.2
Data — Software
The software section allows the 10G Probe to be upgraded to a newer software version. Select the
.tea
file from the local PC and click
Go!
to copy the software to the VB330. When the upload is complete,
clicking the
Save flash
button will store the new software to flash. Note that the probe must not be
powered down during the flash save process. Flash save progress is indicated by progress bars. Note
that the probe will reboot when the new software has been successfully stored in flash, and it will be
unresponsive until reboot is completed.
A more detailed description on the software update procedure can be found in E Appendix: Software
VB3xx 10G Probe User’s Manual version 5.3
181
Summary of Contents for VB330
