Multicast
Name:
The name of the multicast containing the selected service, as defined by the
user
Type:
The type of the stream containing the selected service; multicast or unicast
Multicast address:
The multicast address of the stream containing the selected service
Multicast port:
The port number of the multicast containing the selected service
Transport stream ID:
The ID of the selected stream as shown in the list of multicasts in the Ethernet
section; non-TS services display
1
here
Stream status:
The status of the stream containing the selected service, as reported by the
decoding engine
Bitrate:
The total stream bitrate of the multicast containing the selected service (bits/s)
Service
Service ID:
The service ID of the selected service; non-TS services display
1
here
PSI/SI Name:
The name of the selected service, as derived from PSI/SI; non-TS
services display the multicast name here instead
Controlbit scramble state:
The scramble state as indicated by the MPEG TS control bit
PES sync scramble state:
The scramble state as detected from the PES sync state
Number of PIDs/Components:
The number of PIDs or components associated with the selected
service
Bitrate:
The total bitrate of the selected service (bits/s)
Video PID/Component
PID/Component:
The video PID of the selected service for MPEG-TS services, or
the video component number for non-TS services
Has PCR:
Yes if the selected stream contains PCR, No if not
Bitrate:
The video PID bitrate of the selected service
PES sync:
The latest PES sync state
PES length indicator:
If signaled in the PES packet header, the PES packet length is
displayed; for non-TS services “N/A” is displayed
Status:
The status of the video PID as reported by the decoding engine
Video Information
Size:
The video picture size of the selected service
Aspect ratio:
The video aspect ratio of the selected service, or “N/A” if no infor-
mation is available
VB3xx 10G Probe User’s Manual version 5.3
73
Summary of Contents for VB330
