Sencore VB330, User Manual

Page: 163 / 203

The Setup — Colors view allows the user to define colors that should be recognized if a color-freeze
condition should occur. A mono-colored freeze frame condition may in some cases indicate what
equipment is failing, resulting in the color-freeze.
A freeze color is defined by clicking the Add new color button and assigning an RGB value to a name. A
maximum of four colors may be defined. An existing color may be modified by clicking the associated
Edit link.
Edit color
Name: The color name. This name will be part of a color alarm description and the associated
SNMP trap.
Description: A description of the color or an error indication.
Color:
The RGB color on the format #XX(Red)XX(Green)XX(Blue) where XX represents a
hexadecimal figure spanning 0-255 in decimal notation. If supported by the browser,
clicking the color should pop up a color selection dialog.
6.10.4 Setup — Time
The time of the probe is used to timestamp events in the alarm list . The local time is always presented
just below the alarm list .
The probe time should not be set manually if the probe is synchronizing against a time server (refer to
the Setup — Params view).
If supported by the browser, you should be able to set the time and date using a calendar and time
control by clicking the input box.
VB3xx 10G Probe User’s Manual version 5.3 163