If
Auto-refresh list
is selected, the alarm list will be continuously updated with new alarms. Active
alarms are always located at the top of the list.
Clicking the
View list offline
button gives the user the opportunity to view the complete alarms and
events list. By clicking one of the blue information icons leftmost in the offline list, a detailed alarm
description can be viewed. The search field in the upper right corner of the view allows the user to type a
text string and the alarm list is updated to display only streams and alarms matching the specified text.
To update the offline alarm list click the
Auto-refresh list
button and then go back to the offline mode.
The alarm lists can be deleted by clicking the
Flush alarms
button. However it should be noted that this
action will permanently clear the alarm lists — they cannot be restored.
The
Export
button enables export of the corresponding alarm list as an XML file. This file will open in a
new window.
6.2.2
Alarms — Alarm setup
The
Alarm setup
represents the final filtering stage for VB330 alarms. The user selects whether an alarm
should be enabled or ignored, and associates an error severity level with each alarm, and associates an
error severity level with each alarm. When changes have been made to alarm settings click the
Apply
changes
button for changes to take effect.
Figure 6.1 gives an overview of the total alarm handling of a 10G Probe. The settings in the
Alarm setup
view are represented by the
Alarm Settings
box in this figure.
Note that the probe alarm handling will also depend on the threshold template settings defined by the
user in the
, and
views.
Also note that only enabled alarms are shown in the alarm lists and forwarded as SNMP traps. Enabling
or disabling 10G Probe alarms does however not affect the alarms presented by the VBC. Refer to
Appendix: VB330 Versus VBC Alarms for a description of the VB330 versus VBC alarm handling.
The following alarm severity levels may be selected:
VB3xx 10G Probe User’s Manual version 5.3
41
Summary of Contents for VB330
