6.7
Traffic
6.7.1
Traffic — Protocols
The
Protocols
view allows monitoring of IP traffic on the selected port in terms of the protocols used.
The interface can be selected using the drop-down at the bottom of the page. Clicking the
Clear statistics
button will reset displayed values.
The following measurements are presented, depending on which statistic is selected:
Statistics
Statistic:
The protocol for which the following measurements apply
Cur bitrate:
The current total bitrate for this protocol (measured over the last 1s period)
Max bitrate:
The maximum bitrate during any 1s period
Min bitrate:
The minimum non-zero bitrate during any 1s period
Frames/sec:
Traffic speed in number of IP packets per second
Frames:
Number of Ethernet frames
Frames %:
Percentage of total number of frames
Min flen:
Minimum Ethernet frame length
Max flen:
Maximum Ethernet frame length
Bitrates
Statistic:
As above
Cur bitrate:
As above
Bitrates:
A graph displaying the bitrate over time, displaying the last five minutes
94
VB3xx 10G Probe User’s Manual version 5.3
Summary of Contents for VB330
