Sencore VB330, User Manual, Page: 200 / 203

Using ftp and telnet/ssh
Step 1, alternative A: Using Windows Explorer
Open a Windows Explorer window. Click the address field and type
ftp://10.0.20.101
(replace
10.0.20.101 with the probe’s IP address) and hit
Enter
. When asked to log in, enter the User name
admin and password elvis in all lower-case letters (this password can be changed in the Setup –
Security view).
Then drag the software image onto the empty Windows Explorer window. It may be necessary to retype
the string including user and password, as described above. When the file has been copied onto the
probe the Windows Explorer window may look as shown below.
Step 1, alternative B: Using a terminal based ftp client
In a terminal window type the following commands, replacing the software image name with the relevant
one (the path to the folder in which the software is located should be specified):
ftp 10.0.20.101
Connected to 10.0.20.101.
220 bftpd 4.4 at 10.0.20.101 ready.
503 USER expected.
User (10.0.20.101:(none)):
admin
331 Password please.
Password:
elvis
230 User logged in.
ftp>
binary
200 Transfer type changed to BINARY
ftp>
put vb330-5.2.0-10.tea
...
ftp>
bye
200 VB3xx 10G Probe User’s Manual version 5.3