Seiwa Techmarine User Manual Download Page 19

Page: 19 / 158

User Manual

1.2

SWITCHING ON/OFF

Before powering On the chart plotter, check for the correct voltage (10-35 volt

dc) and the correct connections with the positioning instrument.

Switching On

[POWER] for 1 second

In the opening page, underneath the Techmarine logo, you will find the software

version and type. The next page is the First Setup page (see Par. 1.3) which is

activated only when the chart plotter is turned on for the first time and after a

Master reset. Then the chart plotter will automatically show the Jeppesen warning

page and the GPS Status page. Pressing [CLEAR] at this stage to activate the

cartography page.

T-59.01:

NOTE

The default resolution is 800x600 (manufactory condition or after a CLEAR

RAM operation). If connected to a monitor without a different resolution, it is

possible that the image is not shown. So you should set the proper resolution

for the monitor in use (see the monitor manual and the Par. 7.1.7).

Switching Off

[POWER] for 3 seconds

A countdown timer appears on the screen, if you release the key before the

countdown timer reaches zero, the chart plotter will remain On.

1.3

FIRST SETUP PAGE

This menu allows you to configure the chart plotter and the external devices the

first time the chart plotter is powered On. This information can be changed at any

time either from the General Options menu (see Par. 3.1) or by resetting the chart

plotter. Select the correct setup option and press [ENTER], when complete press

[OK]

to exit.

NOTE

T-59.09, press [1, OK].

Fig. 1.3 - First Setup Page menu

The possible selections are listed in the table below:

Language

: The map information will still be displayed in the language of the official digitalized paper chart.

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands