Seiwa Techmarine User Manual Download Page 68

Page: 68 / 158

User Manual

♦

Route Name*

♦

Destination ID

♦

Destination Position

♦

Next Waypoint ID*

♦

Range from Destination to next Waypoint*

♦

Bearing from Destination to next Waypoint*

♦

Route Length*

♦

Distance from Destination to Last Route Waypoint*

♦

Remaining Route Legs*

♦

Planned Cruising Speed

♦

Average Fuel Consumption

♦

Initial Fuel Load

Values identified by * are sent only for Route Following navigation.

The Destination Icon, Navigation leg (Fix Position to Destination), the Next Waypoint

Icon and all other relevant C-Link Navigation Data will be shown on the Slave

chart plotter. Any variation of the C-Link Navigation Data on the Master will be

communicated to the Slave so to keep data aligned on both devices.

MASTER CHART PLOTTER

Operating mode

To select the Master mode follow the procedure:

[MENU] + "Advanced Options" + [ENTER] + "C-Link" + [ENTER] + "Primary

Station" + [ENTER]

Master mode is the default factory setting. All regular chart plotters functions are

allowed. As soon as the Destination is placed, the Master chart plotter will start

transmitting all C-Link Navigation Data.

In Master mode the C-Link Navigation Data received from the NMEA port is ig-

nored. So, if the two chart plotters are both operating in Master mode, the C-Link

Navigation Data sent by the other chart plotter never processed.

Under such condition if the navigation is activated on one of the two chart plot-

ters, a warning message will be shown to notify that the C-Link navigation data

will be ignored by the other chart plotter.

SLAVE CHART PLOTTER

Operating mode

To select the Slave mode follow the procedure:

[MENU] + "Advanced Options" + [ENTER] + "C-Link" + [ENTER] + "Secondary

Station" + [ENTER]

When Slave mode is set, the chart plotter cannot manipulate the C-Link Naviga-

tion Data anymore.

It is necessary to disable the Internal GPS on the Slave chart plotter before start

to work with the C-Link system:

[MENU] + "Advanced Options" + [ENTER] + "Input/Output" + [ENTER] +

"GPS Configuration" + [ENTER] + "GPS Antenna" + [ENTER] + "No" +

[ENTER]

Stop current navigation

If the navigation was already active, it will be disabled as soon as Slave mode is

set. An appropriate warning message will be shown to notify that the Navigation

is already active and to confirm whether Slave mode can be set.

Inhibit Navigation operation

As soon as Slave mode is set, the Destination cannot be placed anymore either

the C-Link Navigation Data is received from the Master or not. Also, when the

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands