Seiwa Techmarine User Manual Download Page 45

Page: 45 / 158

User Manual

TM5e/TM5i/TM5ce/TM5ci/TM7e/TM7i/TM7ce/TM7ci/TM11/T-59.09/

T-59.05/T-59.01:

External Alarm

When any alarm condition occurs the pin is switched from High Impedance to

ground. This signal can be used by an external device (as a hooter or buzzer).

[MENU] + "Alarms" + [ENTER] + "External Alarm" + [ENTER]

2.10 USER MEDIA: SAVE & LOAD MENU

The chart plotter allows to back up Marks, Routes and Tracks to a USER MEDIA.

You can also restore the data to internal memory at a later time. This allows

virtually unlimited storage. The USER MEDIA data storage is organized as a file

system.

USER MEDIA page

To display the content of a USER MEDIA inserted into the MEDIA slot of your chart

plotter:

[MENU] + "Save & Load" + [ENTER]

Fig.2.10 - User MEDIA Menu

Formatting USER MEDIA

In order to be able to use a new USER MEDIA you must format it first. This

operation prepares the USER MEDIA to receive and store information:

[MENU] + "Save & Load" + [ENTER] + [Media]

+ [Format]

NOTE

T-59.09, press [4, SD-Card] and [3, Format].

NOTE

When a USER MEDIA is formatted, all data saved on it will be deleted.

Saving File on USER MEDIA

[MENU] + "Save & Load" + [ENTER] + [Save]

+ select the file type to be

added by using related soft key + insert the file name and type + [ENTER]

NOTE

T-59.09, press [1, Save].

When a certain type of data (Mark, Events, Route, Track) is saved, a new file is

created on a USER MEDIA. The file contains all points of the selected type cur-

rently stored in the internal memory.

♦

Save Marks : to create a new file containing all Marks stored in the chart

plotter

♦

Save Events: to create a new file containing all Events stored in the chart

plotter

♦

Save Routes: to create a new file containing all Waypoints belonging to the

selected Route (Route number is required). Also it is possible

to save all Routes, not only the selected Route.

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands