Seiwa Techmarine User Manual Download Page 146

Page: 146 / 158

148

User Manual

♦

Route Data Report and User Points (Marks/Events/Waypoints) List pages

♦

Display vessel's position, direction and Track

♦

Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,

Depth Alarm, HDOP Alarm, Heading Alarm, Grounding Alarm, External

Alarm)

♦

Man OverBoard (MOB) to navigate back to a missing person or object

♦

C-Link and C-Weather Service

♦

R-B function

♦

Simulation Mode with cursor control

♦

Video Output option

NOTE

If Fish Finder/Radar connected.

TECHNICAL SPECIFICATIONS

♦

Power consumption

: 0.25 A max, @ 12 V

♦

Interface

: NMEA-0183

♦

Autopilot Interface

: NMEA-0180, NMEA-0180/CDX, NMEA-0183

♦

Display Resolution

: 640x480 or 800x600 or 1024x768

pixels user selectable

♦

MEDIA

: C-Card

♦

Video Output

: VGA compatible (adapter cable)

♦

Cartography

: C-MAP B

EPPESEN

DATA MEDIA

♦

Operating temperature range : 32 to 131 °F (0 to 55 °C)

♦

Memory

: Non volatile with battery back-up

♦

Keyboard

: Silicon rubber, backlight

♦

Weight

: 950 gr.

When the package containing the controller is first opened, please check it for the
following contents (if any parts are missing contact the dealer the controller was
purchased from):

♦

External bracket

♦

Power supply and I/O (CBC0FS0804) I/O, cable CBC0FS0603

♦

Fuse 1A (2 pcs) + cable fuse holder (2 pcs)

♦

Cutting template

♦

User Manual

MEDIA INSERTING/REMOVING PROCEDURE

Inserting the MEDIA

Pull and lift up the bottom part of the detachable panel (1 and 2) to remove it.

Hold the MEDIA by the short inclined side so that you can see the C-MAP B

EPPESEN

label. Gently push the MEDIA into the slot as far as it will go (3). Place the

detachable panel on the top and press it in the bottom part to close it (4 and 5).

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands