Seiwa Techmarine, User Manual

Page: 20 / 158

22 User Manual
Chart Language : Selects a sub-menu with two items: Language to set the language to display chart
information and Mode to define how objects are translated.
Distance Unit : Selects the unit for Distance among Nm, Sm, Km.
Speed Unit : Selects the unit for Speed among Kts, Mph, Kph.
Wind Unit : Selects the unit for Wind among Kts, Kph, Mph, m/s, Bft.
Depth Unit : Selects the unit among Ft, FM and Mt.
Altitude Unit : Selects the unit among Ft, FL and Mt.
Temperature Unit : Selects the unit among °C and °F.
Time Reference : Allows switching between UTC or local time, by entering the Local Time offset.
Daylight Saving Time : Sets On/Off the Daylight Saving Time.
Time Format : Selects the format for the time between 12 and 24 hours.
Date Format : Selects the Date Format between MM-DD-YY (month-day-year) and DD-MM-YY (day-
month-year).
Nav-Aids Presentation : Allows to set the Nav Aids presentation as US (Draw Nav-Aids using NOAA symbology) or
INTERNATIONAL (Draws Nav-Aids using international symbology). When selected it
affects Lights, Signals, Buoys & Beacons display.
Keypad Beep : Enables or disables the single audio beeps emitted any time the chart plotter keypad is
pressed. If the incorrect key is pressed or the function required cannot be executed, the chart
plotter emits three beeps.
Cursor Speed : Selects the Cursor Speed among Low, Medium or High in Chart page or into menu.
Devices : Allows to setup the devices that needs a dedicated port as C-Com, BBFF 50/200, Radar
1
and
AIS 38400.
Simulation Mode : Allows to setup the simulation data before use the Simulation function .
NOTE
1
A
VAILABLE
F
OR
T-50.05/T-55.05/TM7e/TM7i/TM7ce/TM7ci/TM11/T-59.09/
T-59.05/T-59.01.
1.4 CHANGING BACKLIGHT AND CONTRAST
You can modify the intensity of the backlight and contrast to make reading easy
and comfortable. Press and immediately release [POWER] (do not press and
hold the key, or the "power-off" message will be displayed!). Two sliders appear
on the screen, showing the current settings for backlight and contrast.
[POWER] + use [Bright-]/[] to adjust backlight levels and/or use
[Contr-]/[Contr+] to adjust contrast [ENTER]
T-59.09:
[POWER] + use [1, Bright-]/[2, ] to adjust backlight levels and/or
use [3, Contr-]/[4, Contr+] to adjust contrast [ENTER]
T-59.01:
[POWER] + use [Key-]/[Key+] to adjust keys light [ENTER]
Now you return to the chart screen with the new backlight and contrast levels
retained.
1.5 SELECTING THE LANGUAGE
It is possible to set the language to display menus, data pages, warning/alarm
messages, full/quick info, list of objects found by find/nearest function, and on
charts (such as place’s names, buoy’s names and so on).
To select the language you want:
[MENU] + "General Options" + [ENTER'] + "Language" + [ENTER] + select
the language you want + [ENTER]
NOTE If the selected language is not available on cartographic data, English
language is used instead.