Seiwa Techmarine User Manual Download Page 84

Page: 84 / 158

User Manual

5.6.12

Alarms Menu

The Alarms menu allows you to define additional sonar alarm settings for Fish

Alarm, Shallow Alarm, Depth Alarm and Temperature Upper/Lower/Rate.

[MENU] + "Alarms" + [ENTER]

Shallow Water

: Triggers an alarm when depth becomes shallower than the value set.

Deep Water

: Triggers an alarm when depth becomes deeper than the value set.

High Water Temp

: Triggers an alarm when the transducer reports a temperature (from TEMP 1 sensor) above the

value set.

Low Water Temp

: Triggers an alarm when the transducer reports a temperature (from TEMP 1 sensor) below the

value set.

Water Temp Rate

: Triggers an alarm when the transducer reports a temperature (from TEMP 1 sensor) variation rate

above the value set.

Fish Alarm

: The options for Fish Alarm set the size of the fishes that, if detected by the unit, switches an alarm

to sound. These options are: Off, Small, Medium, Big and Huge. The alarm sounds if the set size
(or bigger) is detected.

5.6.13

Save & Load Menu

Insert the USER MEDIA into the slot, then follow the procedure:

[MENU] + "Save & Load" + [ENTER]

Load Settings from USER MEDIA

: Load the complete settings from the USER MEDIA and changes the active menu

settings.

Save Settings to USER MEDIA

: This is useful to avoid the user having to retune up Fish Finder after a Clear RAM

operation or a software update.

Restore Current Preset Defaults

: Restores the default values only for the current presets (see Par. 5.6.1, Preset

Mode) and does not affect the other presets.

5.7

TRANSDUCERS

The transducer is a device that transmits and receives sound waves into the

water. The active component inside the transducer is commonly referred to as an

element but actually is a piezoelectric ceramic material.

Please refer to your dealer and/or installer to choose your transducer. Techmarine
suggest

transducers.

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands