Seiwa Techmarine User Manual Download Page 33

Page: 33 / 158

User Manual

♦

Intertidal Areas

♦

Rocks

♦

Wrecks

♦

Obstructions

♦

Shoreline Constructions

♦

Fishing Facility

♦

Dredged Areas

♦

Diffusers

♦

Mooring/Warping Facility

♦

Production Installation

♦

Pingos

♦

No Data Available

If any of these alarm conditions is detected, then the chart plotter highlights the

list of dangerous objects and the correspondant dangerous Route leg. The Route

leg is then drawn in a different color.

It is possible to make the Safe Route Check from menu following the procedure:

[MENU] + "Route" + [ENTER] + "Route Check Report" + [ENTER]

or:

Place the cursor on the desired Route leg + [Check]

The list of the dangerous objects found on the charts crossed by the Route is

shown in the Route check report.

NOTE

T-59.09, press [2, Check].

It is also possible to activate this function in automatic mode:

[MENU] + "Route" + [ENTER] + "Automatic Route Check" + [ENTER] + "On"

+ [ENTER]

If Automatic Route Check is activated, the modified Route legs are checked

everytime a Waypoint is added, inserted, edited or moved.

Before activating the function, you could change the function parameters, as the

width and the depth of the detected area and the research accuracy.

To select the width of the detected area aside the Route:

[MENU] + "Route" + [ENTER] + "Route Width" + [ENTER] + insert the desired

value + [ENTER]

NOTE

Safe Route width value represents half the total width checked by the

function.

To select the depth of the detected area aside the Route:

[MENU] + "Route" + [ENTER] + "Route Depth" + [ENTER] + insert the desired

value + [ENTER]

It also possible to select the accuracy for the Route check, among Minimum, Low,

Medium, High and Maximum:

[MENU] + "Route" + [ENTER] + "Route Check Accuracy" + [ENTER]

2.3

GOTO FUNCTION

This functions allows you to place the destination point and immediately start

navigating to it.

Navigation to Waypoint

Place the cursor on the desired Wa [ENTER] + "Go To" + [ENTER]

or simply:

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands