Seiwa Techmarine User Manual Download Page 115

Page: 115 / 158

117

User Manual

Removing the MEDIA

To remove the MEDIA open the door, then remove the MEDIA from the slot.

CHART PLOTTER DIMENSIONS

INSTALLATION AND REMOVING

It is possible to install this TECHMARINE instrument in "Flush Deck" mode, with

space saving regard to the instrument panel plan. To make the "Flush Deck"

installation it is necessary to permanently remove the silicon gasket between rear

and front, placed around the chart plotter. To remove the gasket, lay the chart

plotter on its front side, to pay attention do not damage LCD and keyboard, and

use a sharpening blade. Put the blade between the gasket and the lateral side of

the rear, to turn the chart plotter.

Warning

Do not pull the gasket during cut operation, to avoid compromising the chart

plotter watertight seal.

Summary of Contents for Techmarine































































































































































Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands

Seiwa Techmarine, User Manual

Search results

Summary of Contents for Techmarine

Reviews:

Related manuals for Techmarine

Brands by name

Popular brands