Sega 2SPICY, Owner'S Manual

Page: 31 / 150

ASSEMBL
Y AND INST
ALLA
TION
Prepare the DVD DRIVE kit (sold separately) and the DVD wire (2 m) included with this product’s DVD kit.
In preparation for software installation, connect the LINDBERGH RED in the front cabinet to the DVD DRIVE
with DVD wire.
Run the included DVD wire from the back
of the front cabinet.
Connect the DVD wire to the game board’s
USB port.
The wire can be connected to any of the four
ports.
• When connecting the DVD wire connector, check the orientation carefully and
connect securely. The connector must be connected in the proper direction. If
it is connected in the wrong direction or indiscriminately at an incline so that a
load is applied, the connector or its terminal pins could break, causing a short
circuit or fire.
• Be careful not to damage the DVD wire by getting it caught between objects,
etc. Doing so may cause a short circuit or fire.
• Connect the DVD DRIVE to the LINDBERGH RED before connecting the power.
Adhere strictly to the proper sequence in performing work. Failing to do so may
cause electrical shock or short circuit.
PREPARATION FOR SOFTWARE INSTALLATION
FIG. 6-6a
FIG. 6-6b
DVD WIRE
605-0094-01