Sega 2SPICY, Owner'S Manual

Page: 36 / 150

ASSEMBL
Y AND INST
ALLA
TION
Take out 1 urea (resin-head) screw and
remove the DVD DRIVE case lid.
Press the DVD DRIVE switch and the DVD
DRIVE tray will come out. Set the DVD
from the DVD kit into the tray. Always have
the labeled side facing upward.
Press the DVD DRIVE switch. The tray goes back into the drive.
Turn the main switch to OFF once, wait for at least one minute, then turn the switch back to ON.
Software is installed automatically from the DVD to the LINDBERGH RED. In some cases, it may take
about 5 minutes to install software to the LINDBERGH RED.
Upon completion of installation, initialization takes place automatically.
Initialization is completed when the Attract Mode Screen appears.
0
Press the DVD DRIVE switch so that the tray comes out. Remove the DVD.
Press the DVD DRIVE switch so that the tray goes back into the unit. If the power is cut off, the tray will
not move.
Set the main switch to OFF.
CASE LID
FIG. 6-8a
FIG. 6-8b