Sega 2SPICY, Owner'S Manual

Page: 40 / 150

ASSEMBL
Y AND INST
ALLA
TION
(4) OUTPUT TEST
When OUTPUT TEST is chosen from Game Test
Menu Screen, a screen to test lamps and their wiring
connections will be displayed. Verify that the lamps
illuminate correctly.
(5) GUN ADJUSTMENT
When GUN ADJUSTMENT is chosen from Game
Test Menu Screen, a screen for adjusting the gun
crosshair will be displayed.
Before operating the product, always play the game to
verify that there are no irregularities during play and
that the crosshair does not require adjustment. Though
the crosshair is adjusted at the factory, adjustment may
be required in some situations because the product is
disassembled for shipment.
NOTE: Strong lighting located near the LCD monitor,
other machines in the surrounding area, and other
objects may have an effect on the gun adjustment.
The above inspections should be conducted regularly
as part of a monthly inspection.
However, GUN ADJUSTMENT should be conducted
once per week.
(6) NETWORK ASSIGNMENTS
When NETWORK ASSIGNMENTS is chosen from
Game Test Menu Screen, a communications settings
screen will be displayed. To connect two machines for
competitive play, both cabinets must be setup.
Choose the communication method and CABINET ID
as appropriate.
FIG. 6-11e
FIG. 6-11f
FIG. 6-11g
OUTPUT TEST
START LAMP OFF
CABINET PANEL OFF
CABINET LED 1 OFF
CABINET LED 2 OFF
CABINET LED 3 OFF
CABINET LED 4 OFF
CABINET LED 5 OFF
CABINET LED 6 OFF
GUN KNOCKING OFF
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
＋
GUN ADJUSTMENT
OLD NEW
-> TOP 10 10
LEFT 10 10
CENTER X 80 80
Y 80 80
RIGHT f0 f0
BOTTOM f0 f0
＋ DEFAULT ＋ ＋
CANCEL
CHECK
EXIT
[OUT OF SCREEN]
SELECT WITH START BUTTON
AND PULL TRIGGER
PRESS TEST BUTTON TO EXIT
＋
NETWORK ASSIGNMENTS
COMMUNICATION STAND-ALONE
CABINET ID 1
OPERATION MODE NORMAL
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON