Sega 2SPICY, Owner'S Manual

Page: 25 / 150

0
ASSEMBL
Y AND INST
ALLA
TION
This product has eight casters (four on front cabinet, four on rear cabinet) and six adjusters (four on front cabinet and
two on rear cabinet).
After determining the installation location, have the adjusters contact the floor directly, and adjust them so the
machine will remain in a level position keeping a space of about 5 mm between the floor and the casters.
Move the product to the installation site.
Move the main cabinet with two or
more people, and the rear cabinet with
one or more people.
Place the front cabinet’s adjusters in contact the floor. Use a wrench to set adjuster heights so that the unit
will stay level.
After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.
The pedal unit is installed
after moving.
8 CASTERS
6 ADJUSTERS
About 5 mm
ADJUSTER
Tighten nut upwards.
ADJUSTER
CASTER
FIG. 6-3a Bottom View
FIXATION TO INSTALLATION SITE
Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
The pedal unit should only be attached after moving the product to its installation
site.
FIG. 6-3b Illustration of Adjuster Setting