Sega 2SPICY, Owner'S Manual

Page: 97 / 150

GAME BOARD
The LINDBERGH RED is mounted on the MAIN BD base (wooden board) inside the base box of the front cabinet.
Remove the MAIN BD base, together with the LINDBERGH RED, from the base box.
Turn off the cabinet’s power.
Unlock the front door with the master key. Remove the door. The LINDBERGH RED is the red sheet metal
case found inside the door.
Remove the following connectors that are connected to the LINDBERGH RED. Hold the connector at its
terminal and pull it straight it out. Be careful as not to pull it out at an angle.
The D-SUB connector and LAN cable have a fastening screw and a lock. After loosening the screw, remove
the connector while opening the lock.
- D-SUB CONNECTOR
- LAN CABLE (Center of board / LAN terminal)
- JVS IO CABLE
- STEREO MINI PLUG CONNECTOR (Green / FRONT terminal)
- POWER CABLE CONNECTOR (18P, 24P) (1 of each)
Remove the one thumbscrew which secures
the MAIN BD base (wooden board).
- REMOVING THE LINDBERGH RED
CONNECTOR (total 6)
THUMBSCREW (1)
M4 x 25, flat & spring washers used
FIG. 16-1a
FIG. 16-1b