Step 10 — Installing Connectors on Wires
There are two different connectors.
The off-white connectors in the
DUET controller box are slightly
different than the KK Molex (bright
white) connectors SeeMeCNC
installs on the wires. If you need to
replace any terminals using the
DUET supplied connectors, replace
the enter end of the motor or switch.
The crimp terminals are NOT
interchangeable.
IF THESE KK CONNECTORS ARE
NOT WITH THE Z TOWER WIRE
PACK, THEY WILL BE LOCATED
IN THE DUET BOX SUPPLIED
WITH YOUR PRINTER KIT.
Assembling Artemis 300
© 2018
seemecnc.dozuki.com/
Page 9 of 40
