Step 32 — Flipping the Machine
Carefully flip the machine upside
down and set it on the ground on
something like cardboard so at not
to damage the machine.
The picture doesn't show cardboard
under the machine because we at
SeeMeCNC like to live on the edge.
A surface that won't scratch the
machine is really recommended
here.
Step 33 — Removing Base Assembly Cover
To remove the cover, lift it straight up on all three corners. You will then need to gently pull out on
the silver sides (one corner at a time) to un-hook the cover.
Assembling Artemis 300
© 2018
seemecnc.dozuki.com/
Page 26 of 40
