Step 38 — Installing the IEC Connector
You will secure the IEC Connector to the sheet metal with M3 x 10mm screws and nylon lock nuts.
These nuts are hard to get to. It is easiest to hold them with a pair of needle nose pliers, and even
better if you have angled needle-nose pliers.
Step 39 — Z Tower Bottom Connections
Locate the two white and one brown wires that at exiting the Z tower in the bottom assembly.
Install the two white wires in the open positions on the Wago connector with the red wire.
Install the brown wire in the open position on the Wago connector with the black wire.
Assembling Artemis 300
© 2018
seemecnc.dozuki.com/
Page 29 of 40
