Step 49 — Installing the PTC Clips
Slide a PTC clip onto the Bowden tube as shown.
Insert the Bowden Tube into the top of the hot end.
Lift up on the black ring in the top of the hot end and slide the PTC clip into the groove between the
black ring and the aluminum adapter.
Perform the same operation on the EZR Struder side. NOTE: approximately 45mm of Bowden
Tube will insert into the EZR Struder.
Assembling Artemis 300
© 2018
seemecnc.dozuki.com/
Page 37 of 40
