Step 44 — Installing Arms on Carriages
Before installing the arms, apply the provided lubricant to the ball joints. Use a q-tip, finger, or
similar item to apply a small amount of lubricant to each aluminum ball joint on the carriage and on
the hot end (6 total ball joints)
Next install the arms to the ball joints. Press the arms onto the ball joints until you hear it pop/click.
It is easiest to install both arms to the carriage and then insert the tension spring between the
arms. Complete all 3 carriages before moving on. Let the arms dangle.
Assembling Artemis 300
© 2018
seemecnc.dozuki.com/
Page 33 of 40
