Sea-doo 2003 GTI LE RFI, Shop Manual

Page: 585 / 779

Section 13 PROPULSION SYSTEM
Subsection 02 (JET PUMP)
SMR2003-040_13_02A.FM
13-02-7
Connecting Rod
Remove:
– reverse gate
– pivot bolt no. 14 .
Withdraw connecting rod.
Pivot Triangle
Remove:
– reverse gate
– connecting rod
– pivot triangle bolts no. 15 .
Withdraw pivot triangle no. 16 .
Pivot Arm
Remove:
– reverse gate
– connecting rod
– reverse cable
– spring no. 17
– pivot arm bolts no. 18 . Take note of bushing
size for reinstallation.
Withdraw pivot arm no. 19 .
1. Pivot bolts (each side)
2. Spring
3. Pivot arm
Nozzle
All Models except LRV DI and XP DI
Disconnect steering cable from jet pump nozzle
no. 20 .
Remove:
– reverse gate
– spring
– pivot arm bolts no. 18 retaining pivot arm and
VTS ring (if so equipped) to nozzle.
Remove nozzle.
LRV DI Models
Disconnect steering cable from jet pump nozzle.
Remove 2 retaining screws no. 21 , 2 sleeves
no. 22 , 2 washers no. 23 .
TYPICAL
1. Screw
2. Washers
3. Sleeve
Remove nozzle.
F16J06A
2 3 1
F01J3BE
2
1
2 3
3
www.SeaDooManuals.net