Sea-doo 2003 GTI LE RFI, Shop Manual

Page: 456 / 779

Section 09 COOLING SYSTEM
Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
09-02-14
SMR2003-029_09_02A.FM
The water supply to the water flow regulator is
provided by the water supply hose coming from
the pump.
1. Water flow going to CSI
The lower hose of the valve is the water supply
and the upper hose is the regulated injection water
for the tuned pipe.
1. Water from engine water supply hose
2. Regulated injection water to the tuned pipe
3. Muffler
Regulated water is injected in the tuned pipe by a
calibrated fitting.
1. Injection fitting
All 2-Stroke Engines
CAUTION: Never modify cooling system arrange-
ment, otherwise serious engine damage could
occur.
1
F06E09A
F06E0CA
2
1
3
TECHNICAL DATA
TYPE:
TLCS (Total Loss Cooling System).
COOLANT FLOW:
Pressure build-up at impeller housing
(no water pump).
TEMPERATURE CONTROL:
Calibrated outlet fittings (no thermostat).
SYSTEM BLEEDING:
Self-bleed type (hose at uppermost point of circuit).
SYSTEM DRAINING:
Self-drain type (hose at lowest point of circuit).
SYSTEM FLUSHING:
Fitting hose adapter.
MONITORING BEEPER:
Turns on at 86 - 94°C (187 - 201°F).
1
F06E0AA
www.SeaDooManuals.net