manualshive.com logo in svg

Schmidt eZT, Operating Instructions Manual, Page: 7 / 60

Share
Download
Schmidt eZT Operating Instructions Manual Download Page 7

ZTA-500N

5

6

Model

Standard

High Capacity

Separated Sensor *

eZ Connect Amplifier

Display

Capacity

Resolution

2.000N

2N

0.001N

5.000N

5N

0.001N

20.00N

20N

0.01N

50.00N

50N

0.01N

100.0N

100N

0.1N

200.0N

200N

0.1N

500.0N

500N

0.1N

1000N

1000N

1N

2500N

2500N

1N

5000N

5000N

1N

2.000N

2N

0.001N

eZT

5.000N

5N

0.001N

20.00N

20N

0.01N

50.00N

50N

0.01N

100.0N

100N

0.1N

200.0N

200N

0.1N

500.0N

500N

0.1N

1000N

1000N

1N

2000N

2000N

1N

5000N

5000N

1N

10.00kN

10kN

0.01kN

20.00kN

 Depends on eZ Connect load cell

20kN

0.01kN

* Various kinds of load cell other than DPU are available.

1. Models

ZT series consists of ZTA series with USB memory connection and displacement 
output function, and ZTS series without the connection and function.
The separated sensor models are also available.
eZT series enable one amplifier to connect to various load cells of your choice. 
eZT series have same functions as ZTA series.

2. Names and Functions

ON/OFF button

ZERO button

PEAK button

SEND button

MENU button

Display

Comparator judgment LED

Measuring shaft

AC adaptor connector

USB connector

I/O connector

Battery cover

Turn ON/OFF the power. Select menu.

Zero values. Select menu.

Toggle between “Peak mode” and “Track mode”. Select menu.

Save data. Send data to a printer and a computer. Select menu.

Go to Set up mode and measurement mode. Enter settings.

Show values, settings and the status.

Judge force values according to set comparator values.

Detect force values of tensile and compression measurement. 
Various kinds of attachment can be attached.

Recharge battery with AC adaptor.

For data sending to PC with USB cable (included).
ZTA only: Save data on USB memory (excluded).

Connect with other equipments, i.e. test stand and PC, with 
optional cables to control the force gauge and the equipments. 

Rechargeable battery inside. The battery can be replaced.*

Functions

Names

* Refer to the page 41.

* Design and appearance differ depending 

on the model and range.

• Measuring shaft

• Comparator 

   judgment LED

• Display

• ON/OFF button

• SEND button

• PEAK button

• ZERO button

• MENU button

• I/O connector

• USB connector

• Battery cover

• AC adaptor connector

ZTA(ZTS)-2N

ZTA(ZTS)-5N

ZTA(ZTS)-20N

ZTA(ZTS)-50N

ZTA(ZTS)-100N

ZTA(ZTS)-200N

ZTA(ZTS)-500N

ZTA(ZTS)-1000N

ZTA(ZTS)-2500N

ZTA(ZTS)-5000N

ZTA(ZTS)-DPU-2N

ZTA(ZTS)-DPU-5N

ZTA(ZTS)-DPU-20N

ZTA(ZTS)-DPU-50N

ZTA(ZTS)-DPU-100N

ZTA(ZTS)-DPU-200N

ZTA(ZTS)-DPU-500N

ZTA(ZTS)-DPU-1000N

ZTA(ZTS)-DPU-2000N

ZTA(ZTS)-DPU-5000N

ZTA(ZTS)-DPU-10KN

ZTA(ZTS)-DPU-20KN

Summary of Contents for eZT





























































Reviews:

No comments