manualshive.com logo in svg

Schmidt eZT, Operating Instructions Manual, Page: 45 / 60

Share
Download
Schmidt eZT Operating Instructions Manual Download Page 45

43

44

15. Specifications

Unit of measurement

Display

Display update

Sampling rate

Battery

Overload capacity

Operating environment

Accuracy

Feature

Model

Output

Overload warning

Functions

ZTA

ZTS

Advanced model with various

functions such as data

saving in USB memory stick,

displacement I/O and more.

eZT

Separate model connectable

to various sensors with ZTA

functions

Standard model with the

same benefit in performance

as ZTA series but reduced

functions.

+/-0.2%F.S.+/-1digit (*2)

N, kgf, lbf (*4)

+/-0.2%F.S.+/-1digit (*1)

— (*3)

— (*3)

4-digit with sign

16 times / sec.

2000 data / sec. at maximum (*5)

Max. 6.5 hours (Approx. 2 hours to charge)

Approx. 200% of capacity

Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH

On-demand display (header and footer), Peak hold (tension and compression),

Internal memory (1000 data), High/Low Setpoints (judgment of OK or NG),

Reversible display, Reversible sign, Auto Zero 

T

imer, High/Low Alarm,

Off timer (auto shut off), Sensitivity, Date and Time display

1st/2nd peak, 

Displacement detection at force peak,

Displacement zero at selected force

—

USB, RS232C, 2 VDC analog output (D/A), 

Comparator judgement (-NG/OK/+NG) Overload warning

High/Low Output (output of judgement) /

USB memory / Displacement

—

Approx.110% of capacity (Warning message and alarm)

Weight

Dimensions (*7)

Accessory

External connecting switch

Send (a point of contact holding), Zero, Peak ON/OFF setting

Capacity 1000N and under : Approx. 490g (*6)

Capacity 2500N and 5000N: Approx. 1100g (*6)

eZT: Approx.450g

Capacity 1000N and under : Approx. W75 x D34 x H191

Capacity 2500N and 5000N: Approx. W83 x D44.5 x H221

eZT: Approx. W75 x D34 x H187

AC adapter, Inspection certificate, CD driver (including simple software for data

logging), Attachments (The set of attachments varies according to range.),

USB cable, Carrying case.

Adapter for USB flash drive (*8)

—

*1  It is the accuracy of eZT the amplifier only.
*2  The accuracy for sensor separated model differs depending on the models of connected load cell.
*3  It depends on the load cell to be used with.
*4  [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or 

kN. [kgf indication] The indication of 2N and 5N models is gf. [lbf indication] The indication of 2N and 5N models is ozf.

*5  When save data in USB flash drive,the transfer rate is 100 data/sec.
*6  Weight is slightly different according to range.
*7  The dimensions of sensor separated model is W75 x D34 x H191 regardless capacity.
*8  USB flash drive is not included.

Test Stands

For stable measurement, we recommend use force gauges with test stand.

HV-500N

Ⅱ

Manual Test Stand

MX2-1000N

Motorized Test Stand

MX2-2500N

Motorized Test Stand (High capacity)

16. Optional Items

MX2-500N

Motorized Test Stand

Optional Attachments

Various kinds of attachments are available corresponding to very diverse shape of samples.

FP-50

Fine Point Chuck

GR-30

Knurled Cam Grips

KC-1001

Wedge Grips

FC-20

Film Grips

GT-30

Vise Grips

Handle: FOH-1

Battery: BP-308

Easy operation to apply high 
force.

Replacement battery.

Summary of Contents for eZT





























































Reviews:

No comments