57
58
18. Output Data
f
Continuous output Measuring value (Approx. 2000data/sec.)
l
Continuous output Measuring value (Approx. 10data/sec.)
a Continuous peak value
Q
±
fffff
±
dddddddPLCSX
[Measuring value / Peak value]
m
±
fffff
±
dddddddPLCSYYMMDDhhmmss
[Saved data]
Appended Chart 1. Format of force response
h Continuous output -peak value
r
Measuring value
p
Status of requested force data
4 digits force value with sign and decimal point
Q
±
fffff
7 digits displacement value with sign and
no decimal point
±
ddddddd
Saved date (YY: year / MM: month / DD: day)
YYMMDD
Saved time (hh: hour / mm: minute / ss: second)
hhmmss
Unit number setting of force, 1 digit integer
P
Unit number setting of displacement, 1 digit integer
L
Comparator judgment
C
High / Low output
S
Status of REC signal and mark point
X
+peak value
n -peak value
1 1st peak value
2 2nd peak value
Ex., +123.4
Ex., +1234567
0 to 5 (*1)
0 to 2 (*1)
H Judgment: +NG
O Judgment: OK
L Judgment: -NG
E Overloaded
D eZ Connect load cell unconnected (*2)
0 Less than No.1 / No.2
1 On and more than No.1
2 On and more than No.2
3
0 No Rec input / No mark point input
1 No Rec input / Mark point input
2 Rec input / No mark point input
Rec input / Mark point input
3
Rec+Shift input / No mark point input
4
Rec+Shif input / Mark point input
5
On and more than No1 / No.2
* 1 Setting numbers and units are different depending on models. (Refer to page 54 of XFC command for detail.)
* 2 “D” is only responded with eZT.
Description of respond data format
01
02
03
04
05
13
14
mN
00
No unit
N
kN
g
kg
N-cm
N-m
Appended chart 2. Units list
* Setting units are different depending on models.
* Units selection differs between Japan model and
on-Japan model.
* Units selection differs between Japan model and
on-Japan model.
07
gf (*)
08
kgf (*)
10
ozf (*)
11
lbf (*)
12
klbf (*)
16
kgf-cm (*)
17
kgf-m (*)
22
ozf-in (*)
23
lbf-in (*)
Appended chart 3.
Unit setting numbers and units
of displacement
* Setting units are different depending on models.
0
1
2
mm
inch (*)
°
Please contact your local distributor or IMADA for any inquiries
about products and measurements.
IMADA CO., LTD.
99, Jinnoshinden-cho, aza Kanowari,
Toyohashi, Aichi, 441-8077 Japan
Telephone: +81-(0)532-33-3288
Telefax: +81-(0)532-33-3866
E-mail: [email protected]
57
58
18. Output Data
f
Continuous output Measuring value (Approx. 2000data/sec.)
l
Continuous output Measuring value (Approx. 10data/sec.)
a Continuous peak value
Q
±
fffff
±
dddddddPLCSX
[Measuring value / Peak value]
m
±
fffff
±
dddddddPLCSYYMMDDhhmmss
[Saved data]
Appended Chart 1. Format of force response
h Continuous output -peak value
r
Measuring value
p
Status of requested force data
4 digits force value with sign and decimal point
Q
±
fffff
7 digits displacement value with sign and
no decimal point
±
ddddddd
Saved date (YY: year / MM: month / DD: day)
YYMMDD
Saved time (hh: hour / mm: minute / ss: second)
hhmmss
Unit number setting of force, 1 digit integer
P
Unit number setting of displacement, 1 digit integer
L
Comparator judgment
C
High / Low output
S
Status of REC signal and mark point
X
+peak value
n -peak value
1 1st peak value
2 2nd peak value
Ex., +123.4
Ex., +1234567
0 to 5 (*1)
0 to 2 (*1)
H Judgment: +NG
O Judgment: OK
L Judgment: -NG
E Overloaded
D eZ Connect load cell unconnected (*2)
0 Less than No.1 / No.2
1 On and more than No.1
2 On and more than No.2
3
0 No Rec input / No mark point input
1 No Rec input / Mark point input
2 Rec input / No mark point input
Rec input / Mark point input
3
Rec+Shift input / No mark point input
4
Rec+Shif input / Mark point input
5
On and more than No1 / No.2
* 1 Setting numbers and units are different depending on models. (Refer to page 54 of XFC command for detail.)
* 2 “D” is only responded with eZT.
Description of respond data format
01
02
03
04
05
13
14
mN
00
No unit
N
kN
g
kg
N-cm
N-m
Appended chart 2. Units list
* Setting units are different depending on models.
* Units selection differs between Japan model and
on-Japan model.
* Units selection differs between Japan model and
on-Japan model.
07
gf (*)
08
kgf (*)
10
ozf (*)
11
lbf (*)
12
klbf (*)
16
kgf-cm (*)
17
kgf-m (*)
22
ozf-in (*)
23
lbf-in (*)
Appended chart 3.
Unit setting numbers and units
of displacement
* Setting units are different depending on models.
0
1
2
mm
inch (*)
°
Please contact your local distributor or IMADA for any inquiries
about products and measurements.
IMADA CO., LTD.
99, Jinnoshinden-cho, aza Kanowari,
Toyohashi, Aichi, 441-8077 Japan
Telephone: +81-(0)532-33-3288
Telefax: +81-(0)532-33-3866
E-mail: [email protected]