manualshive.com logo in svg

Schmidt eZT, Operating Instructions Manual, Page: 16 / 60

Share
Download
Schmidt eZT Operating Instructions Manual Download Page 16

6-2. Multi display

Display force value on the middle display.
The contents on the header and footer 
are selectable.

15

16

The force gauge detects the force applied to the direction of a measuring shaft.
The measurement is done on Peak mode or Track mode.

5. Basic Operation

Power on

Press

Functions

Operation

Description

Shut off

Hold for 
more than 
one second.

Zero values

Peak / Track mode

Press

Memory saving /

Dada sending

Press

Press

Turn on power.  The introduction 
message shows up first, and 
measurement can be started 
after the message disappears.  
The introduction message and 
multi display (Header) show time 
setting.
Turn off power.

Zero values.  
Refer to the page 21 for detail.

Toggle Peak mode and Track 
mode.

Save data to the internal 
memory.  Enable to send data to 
PC and other equipments at the 
same time.  Refer to the page 21 
for detail. 

6. Single display / Multi display

Select either Single display or Multi display.
Refer to the page 27 for detail of toggling.

6-1. Single display

Display force value only.

* Displacement value can be checked on 
  Multi display (ZTA, eZT only).

6-3. Setting of Multi display

Press            (MENU button) at measurement-ready display and the header lights on.  

Press                      (SEND, PEAK button) to select contents while lighting on.  

Press            (MENU button) and the footer lights on.  

Press                      (SEND, PEAK button) to select contents while lighting on.  

Press            (MENU button) and go back to measurement-ready display.

Single display

Multi display

6-2. Multi display

Display force value on the middle display.
The contents on the header and footer 
are selectable.

15

16

The force gauge detects the force applied to the direction of a measuring shaft.
The measurement is done on Peak mode or Track mode.

5. Basic Operation

Power on

Press

Functions

Operation

Description

Shut off

Hold for 
more than 
one second.

Zero values

Peak / Track mode

Press

Memory saving /

Dada sending

Press

Press

Turn on power.  The introduction 
message shows up first, and 
measurement can be started 
after the message disappears.  
The introduction message and 
multi display (Header) show time 
setting.
Turn off power.

Zero values.  
Refer to the page 21 for detail.

Toggle Peak mode and Track 
mode.

Save data to the internal 
memory.  Enable to send data to 
PC and other equipments at the 
same time.  Refer to the page 21 
for detail. 

6. Single display / Multi display

Select either Single display or Multi display.
Refer to the page 27 for detail of toggling.

6-1. Single display

Display force value only.

* Displacement value can be checked on 
  Multi display (ZTA, eZT only).

6-3. Setting of Multi display

Press            (MENU button) at measurement-ready display and the header lights on.  

Press                      (SEND, PEAK button) to select contents while lighting on.  

Press            (MENU button) and the footer lights on.  

Press                      (SEND, PEAK button) to select contents while lighting on.  

Press            (MENU button) and go back to measurement-ready display.

Single display

Multi display

Summary of Contents for eZT





























































Reviews:

No comments