manualshive.com logo in svg

Schmidt eZT, Operating Instructions Manual, Page: 18 / 60

Share
Download
Schmidt eZT Operating Instructions Manual Download Page 18

The number of force value exceeding set 

comparator (High) value.  Zero with          

(ZERO button) while this content lights on.

17

18

Refer to the page 20 for how to set.

6. Single display / Multi display

Contents

Description

Valid Model

Header

Time

ZTA/ZTS

eZT

ZTA/ZTS

eZT

Valid Model

ZTA/ZTS

eZT

ZTA

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA

eZT

ZTA/ZTS

eZT

Time

Date

ZTA/ZTS

eZT

Date

The number of saved force value.

Displacement.  Zero with              (ZERO button) 

while this content lights on. 

(*1)

Average of saved force value.  Unit is 

disregarded.

It shows **** when the data contains different 

units or positions of decimal points.

Number of memory

Number of +NG

Displacement

Average

Contents

Description

Footer

Force peak value.  Zero with             (ZERO 

button) while this content lights on.  Show either 

or both peak value of tensile / compression 

directions, depending on [AND] [OR] selection.

Refer to the page 20.

1st and 2nd force peak value.  Zero with      

(ZERO button) while this content lights on.  P1 

shows 1st, and P2 shows 2nd peak values.

The rate of force value among capacity.

+/- Peak

1st / 2nd peak

ZTA/ZTS

eZT

Set comparator High / Low values.  Enable to 

set the values with           (MENU button) while 

this content lights on.  Change values with 

                        (ON/OFF, ZERO button) and 

enter with           (MENU button).

Comparator

High / Low values

Force bar graph

Multi Display: Menu on footer 

Multi Display: Menu on header. 

* 1  Test stand with linear scale option is needed.

Show the latest memory data.  Press        

(MENU button) to show all the memory data 

with                        (ON/OFF, ZERO button) 

while this content lights on.

The latest 

memory value

Show maximum and minimum values among 

memory data.  Force data only. 

Max. / Min. 

values of memory

The number of force value exceeding set 

comparator (High) value.  Zero with          

(ZERO button) while this content lights on.

17

18

Refer to the page 20 for how to set.

6. Single display / Multi display

Contents

Description

Valid Model

Header

Time

ZTA/ZTS

eZT

ZTA/ZTS

eZT

Valid Model

ZTA/ZTS

eZT

ZTA

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA/ZTS

eZT

ZTA

eZT

ZTA/ZTS

eZT

Time

Date

ZTA/ZTS

eZT

Date

The number of saved force value.

Displacement.  Zero with              (ZERO button) 

while this content lights on. 

(*1)

Average of saved force value.  Unit is 

disregarded.

It shows **** when the data contains different 

units or positions of decimal points.

Number of memory

Number of +NG

Displacement

Average

Contents

Description

Footer

Force peak value.  Zero with             (ZERO 

button) while this content lights on.  Show either 

or both peak value of tensile / compression 

directions, depending on [AND] [OR] selection.

Refer to the page 20.

1st and 2nd force peak value.  Zero with      

(ZERO button) while this content lights on.  P1 

shows 1st, and P2 shows 2nd peak values.

The rate of force value among capacity.

+/- Peak

1st / 2nd peak

ZTA/ZTS

eZT

Set comparator High / Low values.  Enable to 

set the values with           (MENU button) while 

this content lights on.  Change values with 

                        (ON/OFF, ZERO button) and 

enter with           (MENU button).

Comparator

High / Low values

Force bar graph

Multi Display: Menu on footer 

Multi Display: Menu on header. 

* 1  Test stand with linear scale option is needed.

Show the latest memory data.  Press        

(MENU button) to show all the memory data 

with                        (ON/OFF, ZERO button) 

while this content lights on.

The latest 

memory value

Show maximum and minimum values among 

memory data.  Force data only. 

Max. / Min. 

values of memory

Summary of Contents for eZT





























































Reviews:

No comments