27
28
8. Function Setting
9. Measurement of Displacement (ZTA, eZT only)
Valid model
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
Main menu
Sub menu
Setting menu
Description
Initial setting
* 2 [Bright] mode consumes the battery more than [Power Save] mode.
Display
Functions
Display
Format
[Single Display] /
[Multi Display]
Brightness
[Bright] /
[Power Save]
Reverse
Display
[ON] / [OFF]
[Single Display]
Display force value only.
[Multi Display]
Display force value on the
middle display.
The contents on the header
and footer are selectable.
Adjust brightness of the
display. It automatically
turns to [Power Save] mode
even chosen [Bright] when
no-operation conducted. It
goes back to [Bright] when
use.
(*2)
Reverse the display up-side
down. Recommended for
measurement with test stand.
Auto
Shut Off
[OFF] / [5 min] /
[10 min] / [30 min] /
[60 min]
Automatically shut off after
the set time period when no
operation conducted.
OFF
30 min
Power
Save
Multi
Display
Data
and Time
Date Set
[Year] / [Month] /
[Date]
Date & Time setting.
[Hour] is on 24 hours basis.
----/--/--
Time Set
[Hour] / [Minute]
--:--
ZTA series and eZT can detect both force and displacement values.
(A displacement meter needed.) Displacement Type is [OFF] at default.
Select appropriate Displacement Type depending on displacement meters.
9-1. Connecting to IMADA Test Stand with Liner Scale
Instruction manuals of test stands explain types of liner scales.
Please select from [Type A] – [Type E].
9-2. Connecting to Other Liner Scale
9-2-1. Scale setup
When you choose “Manual” in “Displacement type”, you can input Manual coefficient
values from “Set up Torque Gauge” of Force Logger (Included software) or Force
Recorder (Optional software).
This window is opened by the following procedures.
Force Logger
“Gauge Setup” in menu bar -> “Gauge Setup”.
Force Recorder
“Setting” in menu bar -> “Set up Force Gauge”.
Please refer to “Displacement Type” in “Initial
Setup 1” of “Set up Force Gauge”.
Please select “Manual” and input displacement
per 1 count of the displacement meter in the left
box. After pressing Enter key, the color of the
box will change, which means the manual
coefficient values has been successfully
reflected.
Setup window of Force Logger
27
28
8. Function Setting
9. Measurement of Displacement (ZTA, eZT only)
Valid model
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
ZTA/ZTS
eZT
Main menu
Sub menu
Setting menu
Description
Initial setting
* 2 [Bright] mode consumes the battery more than [Power Save] mode.
Display
Functions
Display
Format
[Single Display] /
[Multi Display]
Brightness
[Bright] /
[Power Save]
Reverse
Display
[ON] / [OFF]
[Single Display]
Display force value only.
[Multi Display]
Display force value on the
middle display.
The contents on the header
and footer are selectable.
Adjust brightness of the
display. It automatically
turns to [Power Save] mode
even chosen [Bright] when
no-operation conducted. It
goes back to [Bright] when
use.
(*2)
Reverse the display up-side
down. Recommended for
measurement with test stand.
Auto
Shut Off
[OFF] / [5 min] /
[10 min] / [30 min] /
[60 min]
Automatically shut off after
the set time period when no
operation conducted.
OFF
30 min
Power
Save
Multi
Display
Data
and Time
Date Set
[Year] / [Month] /
[Date]
Date & Time setting.
[Hour] is on 24 hours basis.
----/--/--
Time Set
[Hour] / [Minute]
--:--
ZTA series and eZT can detect both force and displacement values.
(A displacement meter needed.) Displacement Type is [OFF] at default.
Select appropriate Displacement Type depending on displacement meters.
9-1. Connecting to IMADA Test Stand with Liner Scale
Instruction manuals of test stands explain types of liner scales.
Please select from [Type A] – [Type E].
9-2. Connecting to Other Liner Scale
9-2-1. Scale setup
When you choose “Manual” in “Displacement type”, you can input Manual coefficient
values from “Set up Torque Gauge” of Force Logger (Included software) or Force
Recorder (Optional software).
This window is opened by the following procedures.
Force Logger
“Gauge Setup” in menu bar -> “Gauge Setup”.
Force Recorder
“Setting” in menu bar -> “Set up Force Gauge”.
Please refer to “Displacement Type” in “Initial
Setup 1” of “Set up Force Gauge”.
Please select “Manual” and input displacement
per 1 count of the displacement meter in the left
box. After pressing Enter key, the color of the
box will change, which means the manual
coefficient values has been successfully
reflected.
Setup window of Force Logger