51
52
18-4. Command (RS232C / USB)
18. Output Data
Description
File Format
Data
transport
saved in
internal
memory
File name: M00001.csv
Contents:
yyyy,mm,dd,hh,nn,ss[CR][LF]
YYYY,MM,DD,HH,NN,SS,ffffff,uuu,
dddddddd,rrr[CR][LF]
YYYY,MM,DD,HH,NN,SS,ffffff,uuu,
dddddddd,rrr[CR][LF]
YYYY,MM,DD,HH,NN,SS,ffffff,uuu,
dddddddd,rrr[CR][LF]
...
File name:
The continuous numbers follow after [M].
Each number is followed by comma and
saved in CSV style.
Contents:
yyyy: Year / mm: Month / dd: Day
hh: hour (24 hours) / nn: minute / ss: second /
ffffff: force value with sign and decimal point /
uuu: unit for force / dddddddd: displacement
value with sign and decimal point / rrr: unit for
displacement
The date and time is one when start saving.
The displacement data is saved as 0 when
the Displacement Type at Setup Menu is
OFF.
Description
Setting Contents
Command
Category
Receive Setting
Format
Example
Description
Setting Contents
Command
Category
Receive Setting
Format
Example
Comparator setting
Peak setting
Other operations
XDS0
XDS[n]
XFU0
XFU[s]
XFT1234
XFT[bbbb]
XFG0
XFG[t]
XFU
○ ○
Unit setting of
force value
XFT
○ ○
1st / 2nd peak
drop setting
XFG
○ ○
Peak selection
[AND] [OR]
XDS
○ ○
Peak setting
change (middle
display at multi
display)
[s]: number setting of
unit
The corresponding
units differ depending
on models.
* Refer to XFC
command
[bbbb]: peak drops
(four digits without
sign) (*1) (*2)
(*2) [s]:
Setting value
＞
measuring value: 0
Setting value
≦
measuring value: 1
XCO1
XCT1
XCO[f]
XCT[s]
XCO
○
High / Low Output
Result, Value 1
XCT
○
High / Low Output
Result, Value 2
−
−
[t]: 0= AND / 1=OR
(*2) [f]:
Setting value
＞
measuring value: 0
Setting value
≦
measuring value: 1
XCW
Comparator setting
○ ○
XCW[
±
UUUU]
[
±
LLLL]
XCW+0100-0100
XCS[
±
FFFF]
[
±
SSSS]
XCS+0100-0100
Comparator
High / Low
XCS
○ ○
High / Low output
Value no. 1 / 2
Pair of integer with
sign (*1) (*2)
[+/-FFFF]: Value 1
[+/-SSSS]: Value 2
Pair of integer with
sign (*1)
[+/-UUUU]: High
[+/-LLLL]: Low
[u]: Comparator
judgment
H=+NG / O=OK /
L=-NG / E=OVL
D=unconnected (*3)
XCRL
XCR[u]
XCR
○ −
Comparator
(Judgment) result
output
* 1 Decimal point is not included to setting and response. Place of decimal point depends on units.
* 2 Only for ZTA, eZT.
* 1 Decimal point is not included to setting and response. Place of decimal point depends on units.
* 2 Only for ZTA, eZT.
* 3 “D” is only responded with eZT, it means eZ Connect load cell unconnected.
Reset
R
−
−
XAZ
○
Only for ZTA
R
R
R
−
−
−
−
−
−
XFY
○
Reset peak force
value and its
displacement
XFZ
○
Reset measuring
force value
XLZ
○
Reset measuring
displacement value
Reset peak, force,
and displacement
values.
[n]: number setting of
peak
0= measuring value
1= /- Peak
value
2= +Peak 3= -Peak