schmersal Praxi 100, Manual

Page: 27 / 52

27
Table 12. Ethernet common settings (M5.9.1)
Selectable alternatives are DHCP (Dynamic Host Configuration Protocol) and Fixed. The DHCP protocol gives IP
addresses to new devices connecting to local network. This address is valid for a certain period of time. If no DHCP
server is found, an automatic random IP is given. A fixed IP address is specified manually and it does not change.
When the mode is changed from DHCP to Fixed the addresses will read:
IP: 192.168.0.10
Subnet mask: 255.255.0.0
Default gateway: 192.168.0.1
An IP address is a series of numbers (like above) specific to the device connected to the Internet.
5.3.1 Ethernet Common Settings (M5.9.1)
5.3.2 IP Address Mode
5.3.3 Fixed IP Address
5.3 Modbus TCP/UDP Parameters and Monitoring Values
Panel Tree Parameter Range Default ID Description
P5.9.1.1 IP address mode
Fixed (1),
DHCP(2)
DHCP (2) 2482 IP Mode
P5.9.1.2
Duplicate IP
Detection
Disabled (0),
Enabled (1)
enabled 2569
This is setting for enabling
ACD (See Chapter 3.4).
When disabled drive does
not check for or react to
address conflict situation.
P5.9.1.3.1 IP address
1.0.0.0 -
223.255.255.255
192.168.0.10 2529 Fixed IP address
P5.9.1.3.2 Subnet mask
0.0.0.0-
255.255.255.255
255.255.0.0 2530 Fixed Subnet mask
P5.9.1.3.3 Default gateway
0.0.0.0-
255.255.255.255
192.168.0.1 2531 Fixed default gateway
P5.9.1.4 Active IP address - - 2483
Shows current active IP
address. It is same as
fixed value if IP mode
is “Fixed”.
P5.9.1.5
Active subnet
mask
- - 2484
Shows current active
subnet mask. It is same
as fixed value if IP mode
is “Fixed”.
P5.9.1.6
Active default
gateway
- - 2485
Shows current active
default gateway. It is same
as fixed value if IP mode
is “Fixed”.
P5.9.1.7 MAC address - - 2486 Drive MAC address