26
This value counts error situations. The function code received in the query refers to a not allowed action for the server
(or slave). This corresponds to Modbus fault code 01h.
This value counts error situations. The data address received in the query refers to not allowed address for the server
(or slave). This corresponds to Modbus fault code 02h.
This value counts error situations. A value contained in the query data field refers to a not allowed value for server (or
slave). This corresponds to Modbus fault code 03h.
This value counts error situations. The server (or slave) is engaged in processing a long-duration program command.
The client (or master) should retransmit the message later when the server (or slave) is free. This corresponds to
Modbus fault code 06h.
This value counts error situations. The server (or slave) attempted to read record file but detected a parity error in the
memory. This corresponds to Modbus fault code 08h.
This value counts error situations. An unrecoverable error occurred while the server (or slave) was attempting to
perform the requested action. This corresponds to Modbus fault code 04h.
Shows the last fault response as Fault code.
Shows the Control Word received from the bus.
Shows the current Status Word that is sent to the bus.
5.2.10 Illegal Functions
5.2.11 Illegal Data Address
5.2.12 Illegal Data Values
5.2.13 Slave Device Busy
5.2.14 Memory Parity Error
5.2.15 Slave Device Failure
5.2.16 Last Fault Response
5.2.17 Control Word
5.2.18 Status Word
Summary of Contents for Praxi 100
Page 1: ...Safe solutions for your industry Manual MODBUS Praxi 100...
Page 51: ...51...
