19
Figure 6.
For more detailed information, see the user’s manual of the fieldbus you are using.
The AC drive can be connected to fieldbus either through RS485 or Ethernet. The connection for RS485 is on the
standard I/O terminals (A and B) and the connection for Ethernet is left to the control terminals.
4.2 Installation in PRAXI
®
100 x
4.2.1 Prepare for use Through Ethernet
Ethernet
connection
1
2
3
4
5
6
7
8
9 10 11
12 13 14 15 16 17 18 19 30
B
A
RS485
terminals
1
Connect the Ethernet cable (see specification in Chapter 3.2) to its terminal and run the cable through
the conduit plate.
2
Remount the powerhead.
NOTE:
When planning the cable runs, remember to keep the distance between the Ethernet cable and
the motor cable at a minimum of 30 cm.
Summary of Contents for Praxi 100
Page 1: ...Safe solutions for your industry Manual MODBUS Praxi 100...
Page 51: ...51...
