Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
+49 (0)7461 9472-0
+49 (0)7461 9472-20
www.schilling-marking.de
MegaLight
Installation
Technical modifications reserved
21
Edition 2004
Two tilt able mirrors are installed inside the engraving scanner head, moved by galvo-motors
and run by the DSP2 board installed in the P.C., which in turn interfaces with a digital analogy
converter D/A, also installed in the head.
Two connectors are present outside of the Miniscanner type head (see Appendix A: Technical
Specifications):
•
Scanner head power supply connector (connector DB9)
•
Galvo-motor command connector (connector DB25)
Picture 8: Rear view of the Engraving Head with connectors
Objective lens
The objective lens can be fitted with different length lens.
Typically, for the Miniscanner head:
Lens length (mm)
63
100 *
160
Work area (mm x mm)
35 x 35
60 x 60*
100 x 100
Work distance (mm)
1
73 ± 2
97 ± 2*
180±5
* available in the near future
1
from lens edge
For Scanlab head:
Lens length (mm)
100
160
254
Work area (mm x mm)
50 x 50
110 x 110
180 x 180
Work distance (mm)
1
98 ± 2
175 ± 5
285 ± 5
POWER SUPPLY ± 15V
GALVO-MOTOR COMMAND
SIGNALS
LENS
