Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
+49 (0)7461 9472-0
+49 (0)7461 9472-20
www.schilling-marking.de
MegaLight
Installation
Technical modifications reserved
2
Edition 2004
Edition:
Subject areas covered in the new edition
No. of pages
added or
modified
20/03/2004
Foreword
Megalight™ is a Complex Component not intended to be marketed as a single commercial
unit but rather distributed exclusively as Original Equipment Manufacturer (OEM) to qualified
Suppliers, Users, Installers who have the technical background in relation to the Safety
requirements which an Installed Laser System must possess to become a Laser Machine,
as defined by standard EN 12626 (ISO 11553).
The information contained in this manual is addressed to a qualified installer able to integrate
the device in a system, completing all the protection systems required by international
standards and local laws.
The following manual refers to the model Megalight™, in the two versions Marker and OEM,
i.e. relative to a Laser source which has been designed and developed as a single component
to be integrated in more complex systems to create a Laser engraving system.
The Manual has been written in compliance with the requirements of EC directive 98/37 and
subsequent modifications and integrations, and is intended to supply a qualified installer with
instructions for:
Conformity
Shipping
Use instructions
Use contraindications
Installation
Commissioning
Use
Adjustments
Maintenance
Repair (if necessary)
Training instructions
Technical specifications
Specifications of accessories
Mechanical drawings
Wiring diagrams
The functions required from creating an engraving system must be supplied by an external
Personal Computer, with an appropriate Engraving Software installed on it.
The Marker version is supplied with an Engraving Head and Smartist 4 engraving software
with DAC 2 Hardware (Board for PCI bus and D/A converter) needed for creating the
engraving system. Installation and use instructions for Smartist 4 are provided separately in a
specific manual called: Smartist 4 Manual.
The OEM version does not include the Engraving Head, Hardware and Engraving Software.
It is advisable to carefully read the laser safety instructions contained in this manual and to
refer to the separately provided Laser safety guide.
Make sure the system has not undergone damages from shipping when you receive it and
before installing it. If there are any signs of possible damage, contact the shipping company to
lodge a complaint and notify us at:
