Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
+49 (0)7461 9472-0
+49 (0)7461 9472-20
www.schilling-marking.de
MegaLight
Installation
Technical modifications reserved
24
Edition 2004
The wall socket for connection must be protected by a switch with 16A fuses able with their
high interruption power (normally 6000A) to interrupt the short circuit current of the mains.
N.B.:
The fuses inside the MEGALIGHT™ device are not able to directly interrupt the short
circuit current. If not adequately interrupted the short circuit current may
cause a fire!
2. Connections
The following procedure refers to the device in its “MARKER” set-up.
When they arrive the Resonator and Engraving Head are already connected together and
separately packaged from the Rack and Optical fibre. The necessary wires, interface DSP2
board to be installed in the PC, Smartist4 engraving software and related manual are also in
the packaging.
The System installation procedure involves the following phases:
•
Preparation of the Personal Computer (P.C.) and installation of the DSP2 board,
•
Mechanical attachment of the laser head. See Appendix A. Technical specifications for
the points for attaching the laser head.
•
Electrical system connections
•
Optical fibre connection.
DSP board installation
The complete engraving laser system includes the following components:
•
DSP board, to be connected to a standard or industrial PC PCI type slot.
•
DSP board driver (available for Windows 95 / 98 / 98Me / NT4 / 2000 / XP).
•
DSP Control program for tuning engraving parameters
•
Graphic editor for creating engraving models.
