Operating manual for the VISATRON VN2020
V2.0 12/2021 EN
Page
66
of
106
SCHALLER AUTOMATION
66440 Blieskastel / Saarland / Germany / Industriering 14 / P.O. Box 1280
Industrielle Automationstechnik GmbH & Co. KG
T
el. +49(0)6842-508
-
0
/ Fax -260 / Email: [email protected] /
www.schaller-automation.com
5.
Figure 94: Remove the seal from the
connection box
6.
Figure 95: Clean sealing surface
Remove the connection box. Remove
the seal.
Dispose of the seal in accordance with
local disposal regulations.
Clean the connection box and the base
plate in the area of the connection box.
Carefully clean both sealing surfaces.
7.
Figure 96: Remove the connection box seal
8.
Figure 97: Mount the connection box
Place a new seal on the sealing surface
of the base plate. Secure the seal by
inserting two of the four hexagon screws
with washer on one side.
Hold the two previously inserted screws
while placing the connection box in
position on the sealing surface. Hand-
tighten the two screws by at least three
turns.
