Operating manual for the VISATRON VN2020
V2.0 12/2021 EN
Page
48
of
106
SCHALLER AUTOMATION
66440 Blieskastel / Saarland / Germany / Industriering 14 / P.O. Box 1280
Industrielle Automationstechnik GmbH & Co. KG
T
el. +49(0)6842-508
-
0
/ Fax -260 / Email: [email protected] /
www.schaller-automation.com
7.10.2. Connecting the power supply
The power supply must be provided by the operator for the following steps.
(1) Switch on the power supply for the oil mist detector.
(2) The LEDs on the display of the measuring head flash immediately after you switch on
the power supply. The oil mist detector now counts down for 30 seconds. After the
time has elapsed, the
“System ready” LED comes on.
Figure 60: Measuring head display, in operating mode
If the LED does not light up, please jump to Section 8.2.
7.10.3. Setting the sensitivity of the oil mist detector
The customer is responsible for deciding on the sensitivity of the oil mist detector. The oil mist
detector is set to sensitivity level 2 at the factory.
To change the sensitivity of the oil mist detector, follow the instructions in the User Software
Manual (on the DVD).
