Scantech DC-100 Programming Manual Download Page 59

Page: 59 / 86

Code 39

Return to Default

After read this setting, the parameters of Code 39 will be returned to factory

default

Return Code 39 to Default

Enable/Disable Code 39

Eanble Code 39 Disable Code 39

Code ID

Read “Enable CodeID

”

to start the setting, then scan the corresponding 16 HEX

Value of CodeID character and save.

Code 39 - Enable CODEID

Set the CodeID of Code 39 as

“

”（

16 HEX Value is 0x70

）：

1. Read above “Enable CodeID”

2. Read number

“

”

，

“

”

(See Appendix- Data Code)

3. Read “Save”

Check

Code 39 not limit to include the check digit, if there is check digit, the last

character will be. Check digit is the counted value according to all the data, which used

to check the correctness of the data.

If check digit is “None”, the scanner will transfer the code data normally.

Summary of Contents for DC-100























































































Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands

Scantech DC-100, Programming Manual

Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands