41
maximum length is shorter than the minimum length, the scanner can only read this
two length of code; if the maximum length is equal to minimum length, the scanner can
only read the code of this length.
This length is the length of the code itself, not including prefix/suffix, tailed suffix,
AIM-ID,CODEID.
ITF-6
Return to Default
After read this setting, the parameters of ITF-6 will be returned to factory default
Return ITF-6 to Default
Enable/Disable ITF-6
Enable ITF-6 No Transmit Check Character Enable ITF-6 Transmit Check Character
Disable ITF-6
Code ID
Read “Enable CodeID
”
to start the setting, then scan the corresponding 16 HEX
Value of CodeID character and save.
ITF-6 - Enable CODEID
Set the CodeID of ITF-6 as
“
p
”(
16 HEX Value is 0x70
):
1. Read above “Enable CodeID”