Scantech DC-100 Programming Manual Download Page 60

Page: 60 / 86

If “check and no transmit check digit”, the scanner will take the last character as

check digit. If check success , the scanner will transmit the normal data except for the

check digit, if check fail, the scanner will not read the code.

If “check and transmit the check character”, the scanner will the last character as

check digit. If check success, the scanner will transmit the code and the check digit as

the last character together, if check fail, the scanner will not read the code.

None Check and No Transmit Check Digit

Check and Transmit Check Digit

Enable/Disable Start and End Character

There is “*” before and after the Code 39 as start and end character, which can be

set to transmit with the code after decoded.

Enable Start and End Character Disable Start and End Character

Identify ASCII Character

Code 39 including all ASCII characters, the scanner can read some of the

character in default, it can read all the ASCII characters after setting.

Disable All ASCII Characters Enable All ASCII Characters

Code Length Limit

The scanner can only read the the code length within the limited of Code 39, the

Summary of Contents for DC-100























































































Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands

Scantech DC-100, Programming Manual

Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands