Scantech DC-100 Programming Manual Download Page 64

Page: 64 / 86

Code 93

Return to Default

After read this setting, the parameters of Code 93 will be returned to factory

default.

Return Code 93 to Default

Enable/Disable Code 93

Enable Code 93 Disable Code 93

Code ID

Read “Enable CodeID

”

to start the setting, then scan the corresponding 16 HEX

Value of CodeID character and save.

Code 93 - Enable CODEID

Set the CodeID of Code 93 as

“

”（

16 HEX Value is 0x70

）：

1. Read above “Enable CodeID”

2. Read number

“

”

，

“

”

(See Appendix- Data Code)

3. Read “Save”

Check

Code 93 not limit to include the check digit, if there is check digit, the last

character will be. Check digit is the counted value according to all the data, which used

to check the correctness of the data.

If check digit is “None”, the scanner will transfer the code data normally.

Summary of Contents for DC-100























































































Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands

Scantech DC-100, Programming Manual

Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands